Gravel and Block Paving Driveway in Ashford, Kent
Preparation Summary:
Dug out and removed the area, Graded off the surface, Redesigned the layout of the area, Supplied and installed MOT Type 1 foundation, Supplied and installed membrane sheeting, Installed new kerbing set in concretePaving Installation
Supplied and installed a sand / grit base for laying paving, Installed paving on top of the sand, Laid the paving in a °90 degree herringbone pattern, The paving used was block paving, All open edges of paving set in concrete, Machine vibrated and compacted the paving
Main Colour: Brindle
Border Colour: Charcoal
Gravel Installation
A new cobblestone border around the area set in concrete, Laid-in membrane weed block, Installed a new gravel stone surface over the area, The gravel stone was 20mm aggregate
Gravel Colour: Gold
Here are some before and after pictures of a gravel and block paving driveway project completed by JD Drivestyle in Ashford, Kent.
First, we dug out the original driveway. We installed a new hardcore foundation with weed controlling membrane underneath. Then we laid down new flat-top kerbing all around the perimeter of the driveway. We laid the block paving near the carport in a 90° pattern, using Brindle paving blocks with a Charcoal border. Finally, we topped the remaining driveway with gravel and raked it even.
For more details about our block paving services in Kent, head to our website. JD Drivestyle is a professional and affordable contractor with many years of experience.
No images available for this gallery.
